The original Rollbot showed that a spherical robot could move with just one actuator, but it crept along and needed external motion capture to know where it was. Its steering relied on modulating a quasi-stable helical orbit, which made travel slow and indirect.
Rollbot 2 keeps the single-actuator design but reshapes the mass distribution so the robot rolls in a nearly straight line. Onboard inertial sensing and ultra-wideband (UWB) beacons let it steer, seek beacons, and follow waypoints using only a single motor-velocity command, with no motion-capture system.
In tests, Rollbot 2 autonomously approached UWB beacons and completed a manually commanded 468-meter indoor route at 0.87 m/s. On the shared 4.8-meter 'N' waypoint benchmark, all 16 trials finished, with a mean traversal time of 10.8 seconds and a mean time-averaged deviation of 7 centimeters. Its fastest traversal was 8.0 seconds, more than 70 times faster than the original Rollbot's 564-second run, though the authors note minor protocol differences.
The authors attribute the gains to the combination of mechanical redesign, onboard sensing, and learning-based control. The work suggests that even extremely simple hardware can achieve agile, autonomous locomotion when the body and controller are co-designed.